RFID UHF TAGS
UHF FREQUENCY PER AREA
UHF RFID systems usually have a much larger reading range than HF, making this frequency the best choice for applications where an extended application is the most important factor. A typical UHF RFID tag can be read up to 10-15 meters or longer depending on the operating environment, but typical reading distance is 0.5 to 5-6 meters. Here, the size of the chip and antenna, as well as the reader's properties are important factors.
RFID tags using UHF can also transmit data faster than either LF or HF, allowing users to read far more codes per second. Reading distance is longer, and the reading speed is higher, but the signal is more likely to be affected by the environment and material due to the UHF's shorter wavelength.
UHF RFID tagging systems are commonly found in large warehouses, industry, and manufacturing plants where reading distance, speed, and efficiency are the most critical factors. Important to note is that the UHF requires special tags to be mounted on metal and works poorly in connection with water as water absorbs the radio signals (which are therefore not returned to the reader).
IC PIPE TRACKER
Industry: Oil & Gas, Mining, Construction, Lifting, Power Utilities
​
The PipeTracker UHF tag was designed specifically to track pipe in the Oil & Gas industry. Its robust carrying case and attachment system enables it to withstand the harsh environments associated with the Oil & Gas industry.
IC PIPETRACKER2
Industry: Oil & Gas, Mining, Construction, Lifting, Power Utilities
​
The PipeTracker2 UHF tag was designed specifically to track pipe in the Oil & Gas industry. Its robust carrying case and attachment system enables it to withstand the harsh environments associated with the Oil & Gas industry.
MICRO CERAMIC TAG
The RCC6012 tag is the smallest form factor we can offer. It is designed for small metal objects and can withstand repeated autoclave cycles. It meets FDA requirements, is ATEX certified, and is an ideal solution for tracking surgical instruments and hand tools and more.
It is biocompatible to ensure safety in medical applications and has been tested to survive in harsh environments such as high temperature and chemical washing.
FLEXIBLE ON-METAL LABEL
This RFID label is flexible and can easily be attached to metallic assets, and especially for irregular and uneven surfaces, such as steel boiler, metal container, steel pipe, etc. It has good metal performance and can be written with RFID printers, such as SATO CL4NX, Postek TX3r, etc.
The size is 65 x 35 x 1.25 mm (other sizes on request)
DISCTAG
ATEX Zone 1/21 Certified 34 mm ON METAL RFID TAG is a universal product and is useful in several industrial applications to optimize asset management asset identification, machine marking, mobile maintenance and service, and all kinds of logistics applications. The robust housing in combination with the 4.5 mm mounting holes provides secure mounting and is perfect in and on metal objects.
FLEXIBLE TAG ON-METAL
Flexible RFID tags are among the most advanced brands of this type available. The unique thermoplastic elastomer housings (TPE) - made of the same materials used worldwide to produce automotive tubes and hoses - can withstand repeated bending or twisting, while maintaining good performance characteristics. The robust "wrapping" ensures the chip's electronics even under tough conditions. This version is intended to be attached with a separate cable tie vertically to the object, for example to a pipe.
XERAFY TITANIUM METAL SKIN
Xerafi's Titanium Metal Skin is a revolutionary RFID tag for smart marking of both metallic and non-metallic assets. It is extremely flexible and has a low profile that fits small assets such as smartphones and tablets. With the upgraded stronger adhesive, Titanium is more cost-effective and versatile for a wide range of applications, from product approval and tracking of IT resources to global tracking of assets and counterfeiting of high value goods and medical devices.
